ICY DOCK FlexCage MB975SP-B - Manual (Page 3)

Power Port SATA Port
PUSH
PULL
z All Three 15-PIN SATA power connections must
be used for proper operation of the enclosure.
ˏ˔ˑ Press the release button and then pull the handle to open the front panel.
2 Pin Fan Connector
3 Pin Fan Connector
HDD 5 HDD 4 HDD 3 HDD 2 HDD 1
z The fan speed control can be switched for High,
Low and Auto settings. In High, the fan is at the
maximum output, Low mode is 60% of the maximum,
and in Auto mode, the fan speed will adjust according
according to the temperature of the drives. 80 x 80 x 25mm Fan
Fan Speed Control
Rear Panel Information
Instructions
English