AEG HK653320XB - Manual (Page 28)

Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
Set the Count Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• To set the cooking zone:touch again and again until the indicator of a necessary
cooking zone comes on.
• To activate the Count Down Timer: touch of the timer to set the time ( 00 - 99
minutes). When the indicator of the cooking zone start to flash slow, the time counts
down.
• To see the remaining time: set the cooking zone with . The indicator of the cooking
zone starts to quickly. The display shows the remaining time.
• To change the Count Down Timer:set the cooking zone with touch or .
• To deactivate the timer: set the cooking zone with . Touch . The remaining time
counts back to 00 . The indicator of the cooking zone goes out. To deactivate you can
also touch and at the same time.
When the countdown comes to an end, the sound operates and 00 flashes. The cooking
zone deactivates.
• To stop the sound: touch
CountUp Timer ( The count up timer)
Use the CountUp Timer to monitor how long the cooking zone operates.
• To set the cooking zone (if more than 1 cooking zone operate):touch again and
again until the indicator of a necessary cooking zone comes on.
• To activate the CountUp Timer:touch of the timer comes on. When the indicator
of the cooking zone starts to flash slow, the time counts up. The display switches be-
tween and counted time (minutes).
• To see how long the cooking zone operates: set the cooking zone with . The indica-
tor of the cooking zone starts to flash quickly. The display shows the time that the cook-
ing zone operates.
• To deactivate the CountUp Timer: set the cooking zone with and touch or to
deactivate the timer. The indicator of the cooking zone goes out.
Minute Minder
You can use the timer as a Minute Minder while the cooking zones do not operate. Touch
. Touch or of the timer to set the time. When the time comes to an end, the sound
operates and 00 flashes.
• To stop the sound: touch
STOP+GO
The function sets all cooking zones that operate to the lowest heat setting ( ).
When operates, you cannot change the heat setting.
The function does not stop the timer function.
• To activate this function touch . The symbol comes on.
28 Operating instructions