Regulatory compliance module safety, Esd & electromagnetic compatibility, Lcp-10g3a4edr-a – Approved Optics Approved DELTA LCP-10G3A4EDR User Manual
Page 6
LCP-10G3A4EDR-A
SFP+, 10GBASE-SR 10G Ethernet Module
850mn, 300m, MMF, LC RoHS6
_______________________________________________________
Approved Optics, Inc. www.ApprovedOptics.com
Page 6 of 8
OMA, PRBS 2
31
-1, BER
< 1*10-12@10GBd
-11.1
Stressed Receiver
Sensitivity Ethernet
OMA, PRBS 2
31
-1, BER
PIN
tbd
dBm
Pavg, PRBS 231-1,
BER < 1*10-12@
10.3125GBd
-7.5
Stressed Receiver
Sensitivity Fiber
Channel (OM3
fibers)
OMA, PRBS 2
31
-1, BER
< 1*10-12@2GBd
-10.8
OMA, PRBS 2
31
-1, BER
< 1*10-12@4GBd
PIN
-9.0
dBm
OMA, PRBS 2
31
-1, BER
< 1*10-12@8GBd
-8.3
OMA, PRBS 2
31
-1, BER
< 1*10-
[email protected]
-17.5
Loss of Signal
Pav_as
-30
dBm
POMA_deas
-12
Ethernet:1.25GBd *)
Pav_deas
-17
Regulatory Compliance
Module Safety
Approved Optics SFP+ modules are designed to meet international requirements and
standards in terms of product safety. Tests were performed according
to IEC 60950-1:2001 (CB scheme).The module is RoHS compliant according to the
European Parliament requirements on the restriction of the use of hazardous substances
in electrical and electronic equipment (RoHS). The modules optical output power
meet Class 1 requirements for laser safety.
Requirements
Standard
Status
Module
Safety
IEC 60950-1:2001 EN 60950-
1:2001
TUV Report / Certificate available CB
Report / Certificate available
RoHS
RoHS Directive 2002/95/EC
RoHS 6/6 compliant Certificate of
Compliance Amendment 4054 (2005/747/EC) compliance available
Laser Eye
CDRH 21 CFR 1040.10 and
Laser Class 1 according to FDA
Safety
1040.11 IEC 60825-1 Rev2 2007 Laser Class 1 according to IEC Rev2
ESD & Electromagnetic compatibility
Approved Optics SFP+ modules are designed to withstand high ESD voltages. Its
excellent performances in terms of EMI allow system designers to integrate
the module in high density applications.