Approved Optics Approved JUNIPER XFP-10G-L-OC192-SR1 - Manual (Page 2)

XFP-10G-L-OC192-SR1-A
XFP, 10GBASE-LR 10G Ethernet Module
1310nm, 10km, SMF, LC RoHS6
_______________________________________________________
Approved Optics, Inc. www.ApprovedOptics.com Page 2 of 5
Absolute Maximum Ratings
Parameter Symbol Min. Max. Unit
Maximum Supply Voltage 1 VCC3 -0.5 4.0 V
Maximum Supply Voltage 2 VCC5 -0.5 6.0 V
Storage Temperature Ts -40 85 °C
Case Operating Temperature Top -5 70 °C
Recommended Operating Conditions
Parameter Symbol Min. Typical Max. Unit
Operating Temperature Top -5 70 °C
Supply Voltage 1 VCC3 3.13 3.45 V
Supply Voltage 2 VCC5 4.75 5.25 V
Electrical Characteristics
(TOP = -5 to 70°C, VCC5 = 4.75 to 5.25 Volts)
Parameter
Symbol Min Typ Max Unit Note
Main Supply Voltage Vcc5 4.75 5.25 V
Supply Voltage S#2 Vcc3 3.13 3.45 V
Supply Current Vcc5 Icc5 250 mA
Supply Current Vcc3 Icc3 500 mA
Module total power P 2.5 W
Transmitter
Input differential impedance Rin 100 Ω 1
Differential data input swing Vin,pp 120 820 mV
Transmit Disable Voltage VD 2 Vcc V
Transmit Enable Voltage VEN GND GND+0.8 V
Transmit Disable Assert
Time
10 us
Receiver
Differential data output swing Vout,pp 340 650 850 mV
Data output rise time tr 38 ps 2
Data output fall time tf 38 ps 2
LOS Fault VLOS fault
Vcc–
0.5
VccHOST V 3