Approved Optics Approved CISCO XENPAK-10GB-SR - Manual

XENPAK-10GB-SR-A
XENPAK-SR 10GB Module
850nm, 300m, MMF, SC RoHS6
_______________________________________________________
Approved Optics, Inc. www.ApprovedOptics.com Page 1 of 5
XENPAK-10GB-SR-A
10GBASE XENPAK Transceiver
Features
• XAUI Electrical Interface: 4 Lanes @ 3.125Gbit/s
• Hot Z-Pluggable
• SC-Duplex Optical Receptacle
• MDIO, DOM Support
• Cooled 1.5μm DFB-LD
• PIN Photo-detector
• Operating Case Temperature: 0 to 70 °C
• Compliant to IEEE 802.3ae 10GBASE-SR Application
• Compliant to XENPAK MSA
• Mechanical Footprint: 4.76”Lx1.42”Wx0.46”H
DESCRIPTION
General
Approved Optics 10GbE XENPAK transceiver module XENPAK-10GB-SR-A is a hot
pluggable in the highly integrated Serial optical transponder module for high-speed, 10Gbit/s
data transmission applications. That is usable in typical router line card applications,
Storage, IP network and LAN and compliant to XENPAK MSA. The XENPAK-10GB-SR-A is
a fully integrated 10.3Gbit/s optical transceiver module that consists of a 10.3Gbit/s optical
transmitter and receiver, XAUI interface, Mux and DeMux with clock and data recovery
(CDR). This transceiver line uses a cooled 850nm VECSEL Laser Diode to achieve 300m
over standard multi mode fiber as per 10GBASE-SR of the IEEE 802.3ae specification..