Approved Optics Approved CISCO X2-10GB-SR - Manual (Page 5)

X2-10GB-SR-A
X2-SR 10GB Module
850nm, 300m, MMF, SC RoHS6
_______________________________________________________
Approved Optics, Inc. www.ApprovedOptics.com Page 5 of 8
Stressed Receiver Sensitivity in OMA PIN -7.5 dBm
Saturation Input Power PSAT 1 dBm
General Specifications
Optical Interface Standard Specifications
Standard Fiber Type
Minimum Modal
Bandwidth at 850 nm
(MHz*km)
Operating Range 1)
(meters)
IEEE
62.5 μm MMF 160 2 to 26
50 μm MMF 400 2 to 66
Fibre
Channel
62.5 μm MMF 200 0.5 to 33
50 μm MMF 500 0.5 to 82
50 μm MMF 2000 0.5 to 300
Notes:
1) Operating range as defined by IEEE and Fibre Channel standards. Longer reach possible
depending upon link implementation.
Environmental Performance
Operating case temperature: 0°C to +70°C
Operating humidity: 0% -95% RH non-condensing
Fibers and Connectors
The transponder has SC receptacles for both Tx and Rx. The transponder is designed
for multimode SC cables, 0° polished endface (PC).
Rail and Mechanical Mounting Requirements
The X2 rail system required to mount the X2 module is fully defined by the MSA. (Tyco
Electronics part number 1367608-1: designed for belly to belly applications; and 1367610-1,
designed for single sided board mount to fit into the standard host PCB footprint; or
equivalent). For further details please refer to vendor-supplied information.
Regulatory Compliance
Feature Standard Comments
ESD: Electrostatic
Discharge to the EIA/JESD22-A114-B (MIL-STD
883D
Class 1a (> 500 V)