Approved Optics Approved JUNIPER SFP-10GE-SR - Manual (Page 6)

SFP-10GE-SR-A
SFP+, 10GBASE-SR 10G Ethernet Module
850mn, 300m, MMF, LC RoHS6
_______________________________________________________
Approved Optics, Inc. www.ApprovedOptics.com Page 6 of 8
OMA, PRBS 2 31 -1, BER
< 1*10-12@10GBd
-11.1
Stressed Receiver
Sensitivity Ethernet
OMA, PRBS 2 31 -1, BER
< 1*[email protected]
PIN
tbd
dBm Pavg, PRBS 231-1,
BER < 1*10-12@
10.3125GBd
-7.5
Stressed Receiver
Sensitivity Fiber
Channel (OM3
fibers) OMA, PRBS 2 31 -1, BER
< 1*10-12@2GBd
-10.8
OMA, PRBS 2 31 -1, BER
< 1*10-12@4GBd
PIN
-9.0
dBm
OMA, PRBS 2 31 -1, BER
< 1*10-12@8GBd
-8.3
OMA, PRBS 2 31 -1, BER
< 1*10-
[email protected] -17.5
Loss of Signal
Pav_as -30
dBm POMA_deas -12
Ethernet:1.25GBd *) Pav_deas -17
Regulatory Compliance
Module Safety
Approved Optics SFP+ modules are designed to meet international requirements and
standards in terms of product safety. Tests were performed according
to IEC 60950-1:2001 (CB scheme).The module is RoHS compliant according to the
European Parliament requirements on the restriction of the use of hazardous substances
in electrical and electronic equipment (RoHS). The modules optical output power
meet Class 1 requirements for laser safety.
Requirements Standard Status
Module
Safety
IEC 60950-1:2001 EN 60950-
1:2001 TUV Report / Certificate available CB
Report / Certificate available
RoHS RoHS Directive 2002/95/EC RoHS 6/6 compliant Certificate of
Compliance Amendment 4054 (2005/747/EC) compliance available
Laser Eye CDRH 21 CFR 1040.10 and Laser Class 1 according to FDA
Safety 1040.11 IEC 60825-1 Rev2 2007 Laser Class 1 according to IEC Rev2
ESD & Electromagnetic compatibility
Approved Optics SFP+ modules are designed to withstand high ESD voltages. Its
excellent performances in terms of EMI allow system designers to integrate
the module in high density applications.