ZMODO ZP-IBH13-P 720P HD H.264 PoE IP Infrared Weatherproof Camera with QR Code Smartphone Setup - Zsight iOS User Manual - Manual (Page 6)

Zsight iOS User Manual
Device Info Interface
ID: Refer to the ten-digit number. There are two ways to get the ID: 1) put the cursor to ID
location to manually fill in; 2) click and scan QR Code with phone, then device will
automatically entered to “Wi-Fi interface”( we will introduce how to set network parameter after
scanning ID later in this manual)
Name: Device name, with maximum 60 chars
User: Login in or access device with user name; default user name is admin.
Password: Access device with relevant password; default password is 111111.
Input all of the device info, and click [Done] to finish adding device.
 Second way: AutoAdd
Click [Discovery] tab to enter to “Search Interface”; click [Refresh] tab, your phone will
automatically search all local devices; select the desired device to enter to “Add List
Interface”, and fill in relevant info.