R&M Materials Handling END TRUCKS BRIDGE DRIVES WHEEL BLOCKS RT_RS User Manual
Page 2
R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
%
: (937) 328-5100
FAX: (937) 325-5319
2/29
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
EN PS03447 MASTER Rev: 18.3.2003
I
Read the instructions supplied with the hoist before installation and commissioning.
F
Keep the instructions in a safe place for future reference.
Table of content
1
Safety instructions......................................... 3
1.1
Safety instructions for preparing to install
the end truck ......................................................... 3
1.2
Safety instructions for installing and
operating the end truck ......................................... 3
1.3
Safety instructions for servicing the end
truck 3
2
End Truck RT09/RT11/RS11/RT14/RS14...... 4
2.1
General ........................................................ 4
2.2
Main components ........................................ 4
2.3
Assembling the end truck............................ 4
2.4
Inspection and service procedure for end
truck 5
2.5
Removing and replacing the drive wheel .... 5
2.6
Removing and replacing the idler wheel ..... 5
2.7
Inspection and servicing intervals ............... 5
3
End Truck RT20/RT25/RT32/RT50................ 7
3.1
General ........................................................ 7
3.2
Main components ........................................ 7
3.3
Assembling the end truck............................ 7
3.4
Inspection and service procedure for end
truck 8
3.5
Removing and replacing the drive wheel.... 8
3.6
Removing and replacing the idler wheel..... 8
3.7
Inspection and servicing intervals ............... 8
4
Lubricants..................................................... 10
4.1
Alternative lubricants ................................. 10
5
Recommended tightening torques............ 11
6
Spare Parts ................................................... 12
6.1
RT09.......................................................... 12
6.2
RT11/RS11................................................ 14
6.3
RT14/RS14................................................ 16
6.4
RT20.......................................................... 18
6.5
RT25.......................................................... 21
6.6
RT32.......................................................... 24
6.7
RT50.......................................................... 27