beautypg.com

Installation, Positioning – Hotpoint Ariston KIO 632 C C User Manual

Page 7

background image

7

GB

Installation

!

Before operating your new appliance please read

this instruction booklet carefully. It contains important
information concerning the safe operation, installation
and maintenance of the appliance.

!

Please keep these operating instructions for future

reference. Pass them on to any new owners of the
appliance.

Positioning

!

Keep all packaging material out of the reach of

children. It may present a choking or suffocation hazard
(see Precautions and tips).

!

The appliance must be installed by a qualifi ed

professional in accordance with the instructions
provided. Incorrect installation may cause harm to
people and animals or may damage property.

Built-in appliance
Use a suitable cabinet to ensure that the appliance
functions properly.
• The supporting surface must be heat-resistant up to

a temperature of approximately 100°C.

• If the appliance is to be installed above an oven,

the oven must be equipped with a forced ventilation
cooling system.

• Avoid installing the hob above a dishwasher: if this

cannot be avoided, place a waterproof separation
device between the two appliances.

• Depending on the hob you want to install, the cabinet

must have the following dimensions (see fi gure):

560 +/- 1

490 +/- 1

48

590

520

690

520

560 +/- 1

490 +/- 1

48

Ventilation

To allow adequate ventilation and to avoid overheating of
the surrounding surfaces the hob should be positioned as
follows:

• At a minimum distance of 40 mm from the back

panel.

• So that a minimum distance of 20 mm is maintained

between the installation cavity and the cabinet
underneath.

• Kitchen cabinets adjacent to the appliance and taller

than the top of the hob must be at least 600 mm from
the edge of the hob.

FRONT SIDE

OF HOB

SUPPORTING

SURFACE

30

40

UNDERSIDE

OF HOB

5 mm

min. 20 mm

min. 20 mm

min. 40 mm

COMPARTMENT

5 mm

min. 40 mm

FAN-ASSISTED

OVEN