KIA Sorento 2006 - Manual (Page 40)

4. Position the lap portion of the belt
across your lap as LOW ON THE
HIPS as possible to reduce the risk
of sliding under it during an acci-
dent. Adjust the belt to a SNUG
FIT by pulling up on the shoulder
portion of the safety belt. The belt
retractor is designed to take up
excess webbing automatically and
to maintain tension on the belt. For
maximum safety, do not put any
excess slack into the safety belt.
5. Adjust the shoulder anchor posi-
tion to your size. To raise the
anchor position, push the anchor
up. To lower the anchor position,
press the button and slide the
anchor down. After adjustment,
make sure the anchor is locked in
position.
To unfasten the lap/shoulder belt:
Press the release button on the buck-
le and allow the belt to slowly retract.
KNOWING YOUR VEHICLE
3-31
S2BLA373 S2BLD320
Take up slack
Keep as low on hip
bone as possible
Too high
S2BLA374
BL-ENG (CAN)-3.qxd 7/28/05 5:52 PM Page 31