KIA Amanti 2007 User Manual

Page 177

Driving your vehicle

Adjusting the driver and passenger side

temperature equally
1. Press the DUAL button again or if you

select the highest (HI) or lowest (Lo)
temperature, the DUAL mode deacti-
vates (the indicator light in the button
turns off). The passenger side temper-
ature will be set to the same tempera-
ture as the driver side.

2. Press the left temperature control but-

ton. The driver and passenger side
temperature will be adjusted equally.

Temperature conversion

If the battery has been discharged or dis-
connected, the temperature mode will
reset as Centigrade degrees.
This is normal condition and you can
switch the temperature mode between
Centigrade to Fahrenheit as follows;
While depressing the MODE button,
depress the DUAL button for 3 seconds
or more. The display will change from
Centigrade to Fahrenheit, or from
Fahrenheit to Centigrade.

Fan speed control button

The fan speed can be set to the desired
speed by turning the appropriate fan
speed control knob.
The higher the fan speed is, the more air
is delivered.
Pressing the “OFF” button turns off the
fan.

Air intake control button

This is used to select outside (fresh) air
position or recirculated air position.
To change the air intake control position,
push the control button.

OGH026062