KIA Sedona 2007 User Manual

Page 199

Features of your vehicle

190

CLASSIC

➟POPS➟ROCK➟JAZZ➟OFF

1. POWER ON-OFF Control Knob

• The radio unit may be operated when

the ignition key is in the "ACC" or "ON"
position. Press the button to switch the
power on. The LCD shows the radio
frequency in the radio mode, the tape
direction indicator in the tape mode or
CD/MP3 track in the CD/MP3 mode. To
switch the power off, press the button
again.

• Push the FM/AM, TAPE or CD/MP3 to

turn on that function without pushing
the Power ON-OFF control knob.

VOLUME Control

Rotate the knob clockwise to increase
the volume and turn the knob counter-
clockwise to reduce the volume.

2. AUDIO Select Button

Pressing the AUDIO button changes the
BASS, MID-RANGE, TREBLE, FADER
and BALANCE mode.
The mode selected is shown on the dis-
play.
After selecting each mode, rotate the
Audio control knob clockwise or counter-
clockwise.

BASS Control

To increase the BASS, rotate the knob
clockwise, while to decrease the BASS,
rotate the knob counterclockwise.

MID-RANGE Control

To increase the MID-RANGE, rotate the
knob clockwise, while to decrease the
MID-RANGE, rotate the knob counter-
clockwise.

TREBLE Control

To increase the TREBLE, rotate the knob
clockwise, while to decrease the TRE-
BLE, rotate the knob counterclockwise.

FADER Control

Turn the control knob clockwise to
emphasize rear speaker sound (front
speaker sound will be attenuated). When
the control knob is turned counterclock-
wise, front speaker sound will be empha-
sized (rear speaker sound will be attenu-
ated).

BALANCE Control

Rotate the knob clockwise to emphasize
right speaker sound (left speaker sound
will be attenuated). When the control
knob is turned counter clockwise, left
speaker sound will be emphasized (right
speaker sound will be attenuated).

3. BAND Select Button

Pressing the FM/AM button changes the
AM, FM1 and FM2 bands. The mode
selected is shown on the display.

4. CD SCAN Button

When you press the button, frequency is
changed and the next channel is
received automatically.
To stay on a station, press the CD SCAN
button again.

5. EQ Button

Press the EQ button to select the CLAS-
SIC, POPS, ROCK, JAZZ and OFF
MODE for the desired tone quality. Each
press of the button changes the display
as follows;

6. AUTO SEEK Select Button

(Automatic Channel Selection)

Press the AUTO SEEK select button.
When the

side is pressed, the unit

will automatically tune to the next higher
frequency and when the

side is

pressed, it will automatically tune to the
next lower frequency.