KIA Amanti 2004 - Manual (Page 46)

3 35
1
2
3
4
5
6
7
8
9
Knowing your vehicle
Recalling positions from memory
1. Shift the transaxle lever into P
while the ignition switch is ON.
2. To recall the position in memory,
press the desired memory button
(1 or 2) the system will beep once,
then seat and outside rearview
mirror will automatically adjust to
the stored positions.
Adjusting one of the control knobs for
the seat or outside rearview mirror
while the system is recalling the
stored positions will cause the move-
ment for that component to stop and
move in the direction that the control
knob is moved. Other components
will continue position recalling.
To stop the position recall at any
point in the recall process, press the
STOP button once. Seat and outside
rearview mirror position recalling will
stop.
Storing and recalling with
transmitter
Storing with the transmitter
Turn the ignition switch to LOCK from
ON and lock all the doors using the
transmitter.
The seat and outside
rearview mirror positions will be
stored in the system memory.
Driver’s position recalling with
transmitter
Unlock the door with the transmitter,
positions stored in the system mem-
ory will be recalled automatically.
If using two transmitters, recalling
times may vary because stored posi-
tions in each transmitter may be dif-
ferent.
Example) If doors are locked with
transmitter A and unlocked with
transmitter B, the positions memo-
rized when unlocked with transmitter
B will be recalled and may take
slightly longer than if unlocked with
transmitter A.
CAUTION
Use caution when recalling
adjustment memory while sitting
in the vehicle. Press the STOP
button immediately if the seat
moves too far in any direction.
Opirus-ENG (CAN) 3.qxd 7/8/03 1:56 PM Page 35