KIA Rio_Rio5 2007 User Manual

Page 101

Knowing your vehicle

5. EQ Button

Press the EQ button to select the CLAS-
SIC, POPS, ROCK, JAZZ and OFF
MODE for the desired tone quality. Each
press of the button changes the display
as follows;

6. AUTO SEEK Select Button

(Automatic Channel Selection)

Press the AUTO SEEK select button.
When the

side is pressed, the unit

will automatically tune to the next higher
frequency and when the

side is

pressed, it will automatically tune to the
next lower frequency.

7. TUNE (Manual) Select Knob

Rotate the knob clockwise to increase
the frequency and turn the knob counter-
clockwise to reduce the frequency.

8. PRESET STATION Select

Buttons

Six (6) stations for AM, FM1 and FM2
respectively can be preset in the elec-
tronic memory circuit.

HOW TO PRESET STATIONS

Six AM and twelve FM1 stations may be
programmed into the memory of the
radio. Then, by simply pressing the band
select button and/or one of the six station
select buttons, you may recall any of
these stations instantly. To program the
stations, follow these steps:

• Press band selector to set the band for

AM, FM1 and FM2.

• Select the desired station to be stored

by seek or manual tuning.

• Determine the preset station select

button you wish to use to access that
station.

• Press the station select button for more

than two seconds. Beep sound will be
heard while depressing the button. You
should then release the button, and
proceed to program the next desired
station. A total of 18 stations can be
programmed by selecting one AM and
two FM station per button.

• When completed, any preset station

may be recalled by selecting AM, FM1
or FM2 band and the appropriate sta-
tion button.

CAUTION

• Do not place beverages close to

the audio system. The playback
mechanism may be damaged if
you spill them.

• Do not strike or allow anything to

impact the audio system, damage
to the system mechanisms could
occur.

CLASSIC

➟POPS➟ROCK➟JAZZ➟OFF