KIA Sportage 2006 - Manual (Page 103)

3 37
Knowing your vehicle
1
2
3
4
5
6
7
8
9
Lap/shoulder belt
To fasten the front lap/shoulder
belt:
1. Grasp the buckle and tongue
plate.
2. Slowly pull the lap/shoulder belt
out from the retractor.
3. Insert the tongue plate ( ➀ ) into the
open end of the buckle ( ➁ ) until an
audible “click” is heard, indicating
the belt is locked in the buckle.
4. Position the lap portion ( ➀ ) of the
belt across your lap as LOW ON
THE HIPS as possible to reduce
the risk of sliding under it during
an accident. Adjust the belt to a
SNUG FIT by pulling up on the
shoulder portion (
➁ ) of the safety
belt. The belt retractor is designed
to take up excess webbing auto-
matically and to maintain tension
on the belt. For your safety, do not
put any excess slack into the safe-
ty belt at any location.
1GHA2263 1GHA2264 1GHA2262
KM CAN (ENG) 3 (~54)new.qxd 7/29/05 9:33 AM Page 37