KIA Sorento (2009) - Manual (Page 270)

In case of an emergency
24 6
7. Place the jack at the front or rear
jacking position closest to the tire
you are changing.
8. Securely tighten the valve of the
jack. Move the jack handle up and
down until the top of the jack con-
tacts the proper point and takes on
a slight load.
Raise the vehicle until the tire just
clears the ground (approximately
30 mm (1.2 in)). Never raise the
wheel higher. Before removing the
wheel lug nuts, make sure the
vehicle is stable and that there is
no chance for it to slip or move.
9. Remove the wheel lug nuts by
turning them counterclockwise,
then remove the wheel.
E2BLA620
JACK
E2BLC601 E2BLA621A
WARNING - Jack Location
To reduce the possibility of
injury, be sure to use only the
jack provided with the vehicle
and in the correct jack position;
never use any other part of the
vehicle for jack support.