PowerWalker VMWare ESXi 4.0, 4.1, 5.0 User Manual
Page 6
5
Figure 6.
b. Run “tar zxvf VPVMShutdownWizard.tar.gz” command to unzip the compressed file. Refer
to figure 7.
Figure 7.
c. Key in “cd VPVMShutdownWizard” to access the VPVMShutdownWizard catalogue. Then run
“./INSTALL” to install and auto run the software. Refer to figure 8.
Figure 8.
d. After installation , the default path is set to “/vmfs/volumes/datastore1/VPVMShutdown” as
shown in Figure 9.