BabyTrend INERTIA INFANT - Manual (Page 6)

9 10
Carry Handle
The Carry Handle has four positions: the Carry position, a Mid-
Storage position, a Storage position and the Non-Rocking position.
To adjust handle:
• Depress the two buttons located on the
handle just above the connection to the
Car Seat shell to release the handle.
• Slowly rotate the handle to the desired
position. The buttons should pop out and
the handle should automatically lock into
the new position. (Fig. 9-1)
• Before lifting the Car Seat, push on the
handle to check that both sides of the
handle have locked into carry position.
• Use the Storage or Non-Rocking
position when the Car seat is in the
vehicle.
Build-in Safety Harness
Front adjust 5-point Safety Harness, adjust
the harness with a push of a botton.
Crotch Strap
The crotch strap is adjustable in length to ensure
a safe and comfortable fit for harness.
Locking Clip
The Locking Clip is stored under the seat pad
on the right side of the Car Seat and is used to
securely install the Car Seat with certain types
of vehicle lap/shoulder combination belts.
3.0
Features and Benefits
3.0
Features and Benefits
Carry Mid-Storage Storage
Non-Rocking
9-1
Locking Clip
5-Point Harness