Control locations - monitor closed, Xdvd8285 operation – Dual Electronics XDVD8285 User Manual
Page 10

XDVD8285
OPERATION
9
Power/Mute
AM/FM Mode - Hotkey
Auto Store/Preset Scan
Mode
Menu
Rotary Encoder/Enter
DVD Mode - Hotkey
1
2
3
4
5
6
7
Channel/Chapter/Track Up
Channel/Chapter/Track Down
Play/Pause
Info/Picture
Reset
Open/Close Monitor/Angle Adjust
Microphone
8
9
10
11
12
13
This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will
•
not obstruct the dash, shifter or any other controls.
Upon installation, do not attempt to move the monitor by hand. Use the
•
button on the front panel only or
the OPEN button on the remote control.
The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the
•
obstacle and press or OPEN again to resume the monitor open/close sequence.
Monitor Notes:
Control Locations - Monitor Closed
1
2
4
5
13
12
11
10
9
8
7
3
6
14
14