Dual Electronics XDVD3201 - Manual (Page 7)

6
Wiring Diagram - Inputs/Outputs
XDVD3201 INSTALLATION
Note:
When replacing a fuse, make sure to
use the correct type and amperage.
Using an incorrect fuse could damage
the unit. The XDVD3201 uses (1) 15 amp
ATM mini style fuse located on the back
of the unit.
Wiring Notes:
Subwoofer output
The Subwoofer preamp audio
output (blue jacket with black RCA)
is active in all audio modes.
Rear camera input
A rear view camera (not included)
can be used with the Camera input.
Refer to page 35 for details.
Steering wheel interface input
The steering wheel interface input
(black jacket with blue 3.5mm)
allows connection to the Pacific
Accessory Corporation SWI-PS
interface module (sold separately).
Visit www.pac-audio.com for
details.
Connecting an iPod/iPhone device
To play music from an iPod/
iPhone device using the direct USB
interface, connect the USB cable
(included with your iPod/iPhone
device) to the XDVD3201's USB
port. Once connected, playback will
begin automatically. To view video
and photos from an iPod/iPhone
device, the Dual IPV40 cable (sold
separately) is required.