Dual Electronics XDVDN8190N - Manual (Page 17)

XDVDN8190N OPERATION
16
PICTURE MENU
SHARPNESS 10
COLOR 10
CONTRAST 10
BRIGHTNESS 10
TINT 10
Press INFO momentarily to display DVD disc information.
Press and hold PIC for 3 seconds to change monitor BRIGHTNESS.
Turn volume knob Q or P to adjust to desired level
(0 minimum/20 maximum; 10 is default).
While in Aux or Camera mode:
Press and hold PIC for 3 seconds to access PICTURE MENU.
Press PIC momentarily to step to next selection:
Turn volume knob Q or P to adjust the sharpness.
(0 minimum/+20 maximum).
Turn volume knob Q or P to adjust the color.
(0 minimum/+20 maximum).
Turn volume knob Q or P to adjust the contrast.
(0 minimum/+20 maximum).
Turn volume knob Q or P to adjust the brightness.
(0 minimum/+20 maximum).
Turn volume knob Q or P to adjust the tint.
(0 minimum/+20 maximum).
Note: Adjustments to Sharpness, Color, Contrast, Brightness, or Tint are only
possible while in either Aux or Camera mode. A video signal must be present
for adjusting the CVBS screen controls.
General Operation
INFO/PIC
Monitor Brightness
CVBS Screen Controls
Sharpness
Color
Contrast
Brightness
Tint
L