Dual Electronics XHD7720 - Manual (Page 12)

12
iTunes
®
Tagging
XHD7720 OPERATION
Displayed Message Description
INCORRECT iPod
VERSION
There is a compatibility issue. Check the list of compatible iPod
devices below.
If the attached iPod device is compatible, update the firmware to
the latest version using iTunes
® .
SENDING TAGS
Tags are being transferred. This process can take several
minutes depending on the number of Tags being sent. The unit
must remain in Tuner mode until the process is complete.
iPod FULL
There is not enough space on the connected iPod device to
transfer the iTunes Tags.
TRANSFER FAILED There was a connection error. Ensure the iPod device is powered
on and reconnect it until a TAGS SENT confirmation is displayed.
TAG EXISTS
The same song has already been tagged from the same radio
station, and is currently saved in memory. The same song cannot
be tagged twice, unless the song is tagged on a different radio
station, the Tags are sent to an iPod device or the tags are erased.
MEMORY FULL
CONNECT iPod
The internal memory of the XHD7720 will hold 127 Tags. An iPod
device must be connected to transfer the Tags, or the Tags must
be deleted before more songs can be tagged.
NO TAG INFO
There is not sufficient information (artist or title) to tag the song.
Some HD Radio™ stations or certain songs may not fully support
iTunes Tagging.
TAG FAILED
There was an error saving the Tag information to the internal
memory. Press the TAG button again.
NO TAGS
There are no tags saved in the internal memory. The DELETE
TAGS function can only delete Tags that are saved in the internal
memory.
Below is a list of messages that may be displayed when using the iTunes Tagging
feature with an explanation of the message.
Device Compatibility
with iTunes Tagging Compatible with
• iPod touch (2nd generation)
• iPod nano (4th generation)
• iPod classic
• iPod touch (1st generation)
• iPod nano (3rd generation)
• iPod with video
Refer to www.apple.com/itunes for the latest version of the iTunes software.