Advancedpunch, Punching patterns – GBC AdvancedPunch User Manual

Page 6

AdvancedPunch

The AdvancedPunch uses a variety of easily interchangeable die
sets that allow you to punch documents in line for several different
binding styles. By selecting the appropriate die set, you can use your
AdvancedPunch to punch documents in any of the binding styles
indicated in Table 1.

4. PUNCHING PATTERNS

Xerox Part Number:

XEROX PB-20H, A4

498K19340

XEROX PB-21H, A4

498K19440

XEROX C4-47H, A4

498K19350

XEROX W2-23H-RND, A4 498K19360

XEROX W3-34H-RND, A4 498K19370

XEROX W2-23H-SQ, A4

498K19380

XEROX W3-34H-SQ, A4

498K19390

XEROX VB-12H, A4

498K19400

XEROX PC-34H, A4

498K19410

XEROX 2H-8mm, A4

498K19420

XEROX 4H-8mm, A4

498K19430

For Plastic Comb Binding:

PB Plastic Bind; Hole Size: 8mm x 3.2mm (0.315" x 0.126") (LxW); Centre-to-Centre Hole Spacing: 14.3mm (0.563")

For Twin Loop™ Binding:

W3 Wire; Round; 3 Holes per inch; Hole Size: 4mm (0.158") Diameter; Centre-to-Centre Hole Spacing: 8.5mm (0.335")

W2 Wire; Round; 2 Holes per inch; Hole Size: 6.5mm (0.256") Diameter; Centre-to-Centre Hole Spacing: 12.7mm (0.5")

For Loose-leaf Binding:

For Colour Coil™ Binding:

C4 Coil; Round; 4 Holes per inch; Hole Size: 4.5mm ( 0.177") Diameter; Centre-to-Centre Hole Spacing: 6.3mm (0.248")

For Velo

Binding:

VB Velo

Bind Round; 1 Hole per inch Hole Size: 3.2mm ( 0.126") Diameter; Centre-to-Centre Hole Spacing: 25.4mm (1")

W3 Wire; Square; Australia; 3 Holes per inch; Hole Size: 4mm x 4mm (0.158” x 0.158”) (L x W) Centre to Centre Hole Spacing:
8.5mm (0.335)”

W2 Wire; Square; Australia; 2 Holes per inch; Hole Size: 6.4mm x 5.5mm (0.252” x 0.217”) (L x W) Centre to Centre hole
spacing 12.7mm (0.5)

PB Plastic Bind; Australia Hole Size: 8mm x 3.2mm (0.315” x 0.126”)(LxW) Centre to Centre hole spacing: 14.3mm (0.563”)

4 Ring Binder; European (Standard Loose-leaf Patterns); Hole Size: 8mm (0.315") Diameter

2 Ring Binder; European (loose-leaf pattern), Hole Size: 8mm (0.315") Diameter

ProClick

A4 34-Hole Binding:

Graphics do not represent actual punch pattern dimensions or spacing.

Please note that each punching style listed above requires a
separate die set for the AdvancedPunch. The AdvancedPunch can
hold up to four Die Sets in it’s cabinet (one in the operating slot and
three in the storage area).

To purchase additional or replacement Die Sets, contact your
authorized sales representative.

You cannot use die sets for the AdvancedPunch..

You can confirm the attached die set in the printer/copier.

PC ProClick

; Rectangular; 3 holes per inch, Hole size: 5.5mm (0.217"H) x 5.0mm (0.197"W). Centre to Centre 8.5mm (0.335")