Rainbow Electronics MAX19517 - Manual (Page 3)

MAX19517
Dual-Channel, 10-Bit, 130Msps ADC
_______________________________________________________________________________________ 3
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
DYNAMIC PERFORMANCE
Small-Signal Noise Floor SSNF f IN = 70MHz, < -35dBFS -60.1 dBFS
f IN = 3MHz 59.9
f IN = 70MHz 58.6 59.8 Signal-to-Noise Ratio SNR
f IN = 175MHz 59.5
dBFS
f IN = 3MHz 59.4
f IN = 70MHz 58.0 59.4
Signal-to-Noise Plus Distortion
Ratio
SINAD
f IN = 175MHz 59.3
dB
f IN = 3MHz 82
f IN = 70MHz 70.1 81
Spurious-Free Dynamic Range
(2nd and 3rd Harmonic)
SFDR1
f IN = 175MHz 78
dBc
f IN = 3MHz 82
f IN = 70MHz 74 82
Spurious-Free Dynamic Range
(4th and Higher Harmonics)
SFDR2
f
IN
= 175MHz 82
dBc
f
IN
= 3MHz -82
f
IN
= 70MHz -81 -70.1 Second Harmonic HD2
f IN = 175MHz -78
dBc
f IN = 3MHz -86
f IN = 70MHz -86 -71.5 Third Harmonic HD3
f IN = 175MHz -80
dBc
f IN = 3MHz -79
f IN = 70MHz -78 -68.8 Total Harmonic Distortion THD
f IN = 175MHz -76
dBc
f IN = 70MHz ± 1.5MHz, -7dBFS -90
Third-Order Intermodulation IM3
f IN = 175MHz ± 2.5MHz, -7dBFS -80
dBc
Full-Power Bandwidth FPBW 850 MHz
Aperture Delay t AD 850 ps
Aperture Jitter t AJ 0.3 ps RMS
Overdrive Recovery Time ±10% beyond full scale 1 Cycles
ELECTRICAL CHARACTERISTICS (continued)
(V AVDD = V OVDD = 1.8V, internal reference, differential clock, V CLK = 1.5V P-P , f CLK = 130MHz, A IN = -0.5dBFS, data output termina-
tion = 50Ω, T A = -40°C to +85°C, unless otherwise noted. Typical values are at T A = +25°C.) (Note 1)