TC Electronic PolyTune Classic - Manual (Page 8)

8
Connecting
Input jack - connect your instrument here using a 1/4 inch
mono jack cable. If you run on battery we recommend removing
this jack to preserve battery power when you don’t play.
Output jack - connect to another pedal or directly into an amp
or mixer. When the tuner is active the output will be muted for
silent tuning. Notice that PolyTune™ is designed with a true
bypass circuit that leaves your beloved tone unaltered when the
tuner is bypassed.
Power in - use a 9 VDC power supply with the following
symbol:
Power out - If you use an external power supply you may use
PolyTune’s™ power out to daisy-chain power to other pedals.
• Do NOT connect an external power supply to POWER OUT. This could cause malfunction or damage
to PolyTune™. Current draw on daisy-chained pedals may not exceed 2A.
• Be sure that your power supply delivers sufficient power to cover the power consumption of
all pedals.
• Place PolyTune™ before drive and distortion pedals for best tuner indication.