TC Electronic Spark Booster - Manual (Page 8)

8
Changing battery – Unscrew the thumb-screw on the back of the pedal and detach the back-plate.
Unmount the old battery and attach the new battery to the battery clip making sure the polarity is
correct. Then remount the back-plate. To save battery life, remove the input jack when you don’t play.
Batteries must never be heated, taken apart or thrown into fire or water. Only rechargeable
batteries can be recharged. Remove the battery when the pedal is not being used for a longer
period of time. Dispose batteries according to local laws and regulations.
Voice Type selector
Three Voice types are available
-
in “Fat” position (up), the low-end frequencies are naturally boosted. This is excellent where the
guitar is allowed to take up a great portion of the sonic spectrum.
- “Clean” position (middle), is a total transparent mode. No EQ is applied to the signal.
- in “Mid” position (down) midrange frequencies are emphasized. It is not only a boost in level that
will make your licks stand out. Sometimes a boost in midrange frequencies is exactly what you are
looking for more than a change in level.