TC Electronic DVR2 TDM - Manual (Page 6)

EE
NN
GG
LL
II
SS
HH
6 / DVR2 - TDM
• Click on the parameter you wish to link to the selected Focus Field.
• To get an unassigned (empty) Focus Field, click again on the selected parameter.
• Once you have finished the assignments, click again on the Assign button
to leave the assign mode.
OVERLOAD INDICATION (O/L)
The O/L-LED in the metering section, on the left side of the input meters, will light up
in case internal DSP overloads are detected. You should lower the input level to avoid
these overloads. To reset the indication, click on the O/L LED.