weber Pg5 - Manual (Page 20)

20
TROUBLESHOOTING
PROBLEM CHECK CURE
Burner burns with a yellow or orange flame, in
conjunction with the smell of gas. Inspect Burner for possible obstructions. Clean Burner.
(See “Maintenance” section)
Burner does not light, or flame is low. Is LP fuel low or empty? Replace LP cylinder.
Is fuel hose bent or kinked? Straighten fuel hose.
Does the burner light with a match? If you can light the burner with a match, then check
the ignition system.
Is the hose to burner tube connection properly
secured? Connect the gas hose to the burner tube using the
metal retaining clip provided.
ƽ DANGER: Do not use the gas ignition feature
if the retaining clip is missing. A missing
retaining clip can cause serious bodily injury
or death, and damage to property.
Contact Customer Service for a replacement retainer
clip.
Burner flame pattern is erratic. Is burner clean? Clean burner.
(See “Maintenance” section)
Inside of lid appears to be “peeling”. (Resembles
paint peeling.) What you are seeing is baked on grease that has
turned to carbon and is flaking off.
THIS IS NOT A DEFECT. Clean thoroughly.
(See “Cleaning” section)
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our
web site. Log onto www.weber.com
® .