TC Electronic Shaker Vibrato - Manual (Page 7)

7
Connecting
Input jack - 1/4 inch mono jack input
If you run the pedal on battery, we recommend removing the
input jack to preserve battery power when you don’t play.
Output jack - 1/4 inch mono jack output for connecting to
another pedal or directly into an amp or mixer.
Notice that it is possible to select between true bypass and
buffered bypass mode via a dip switch located under the
battery cover.
Power in - use a 9 VDC power supply with the following
symbol:
USB
Connect to a computer using the supplied USB cable for
upload of TonePrints.
The connector-type is Mini-B.