TC Electronic NDR-1 Nova Drive - Manual (Page 8)

SETUP EXAMPLE: NOVA DRIVE & G-SWITCH
8
Expanding NOVA Drive with a G-Switch
By connecting the optional G-Switch from TC
Electronic to the EXT. SW. input on NOVA Drive,
you extend the pedal with three switches.
• Use a TRS/TRS (stereo-jack) cable to connect
G-Switch to NOVA Drive’s EXT. SW. input.
As soon as it is connected, NOVA Drive detects G-
Switch, and you can use it in the various switch
modes as described in the chapter “NOVA Drive
and G-Switch”.
Example:
With G-Switch connected and Bank Mode active,
you can select banks A to F using the UP/DOWN
switches on NOVA Drive. You can then choose
one of the three presets in that bank using G-
Switch.