Apple Universal Dock - Manual (Page 11)

11 English
Note: You can’t use the remote to choose a different playlist. Use the iPod or iPhone
controls instead.
The Apple Remote works with other compatible Apple products that have a built-in
infrared (IR) receiver. You can pair your Dock to work only with a particular remote, so
remotes for your other devices don’t affect the Dock.
To set the Dock to work with only a particular remote:
1 Place your iPod or iPhone in the Dock and press any button on your iPod or iPhone
to turn it on.
2 Make sure other products that are compatible with the Apple Remote are out of range
or powered off, and then hold the remote close to the IR receiver on the Dock (within
3 to 4 inches, or 8 to 10 cm).
3 Press and hold the Right button and Menu (») button on the Apple Remote for
five seconds.
Your Dock now works only with the paired remote.
Note: You may want to pair your other Apple Remote compatible devices with
other remotes, so the remote you use with your Dock doesn’t affect those devices.
For instructions, see the documentation that came with those devices.
To reset the Dock to work with other Apple Remotes:
m Follow steps 1 and 2 above. Then press and hold the Left button and Menu (»)
button on the Apple Remote for five seconds.
The Dock now works with any Apple Remote.