Moog Music CP-251 Moogerfooger Control Processor - Manual (Page 22)

22
“ Phaser-rhythm”
This patch uses the voltage steps at the CP251 S+H OUT 1 jack as the audio input to
an MF103 12-Stage Phaser. The sharp voltage rise at the beginning of each step
creates a wideband click. This causes the phaser to “ ring” simultaneously at several
frequencies, thereby converting the click into a distinctive percussive tone.
Figure 15 - Setup for “ Phaser-rhythm” .
• Connect patch cords as follows:
a) MF103 LFO OUT jack to CP251 S+H IN jack,