Wearwell 560 ERGODECK CABLE BRIDGE - CORNER - Product Sheet User Manual
Product detail sheet
ErgoDeck® Cable Bridge Kit
Product No. 560
Problem:
Exposed cables and hoses in the industrial work place pose trip hazards. A common “fix” is using
tape or other temporary alternatives.
Solution:
Our ErgoDeck® Cable Bridge is comprised of existing sku’s and used in conjunction with ErgoDeck
flooring. With proper planning the system eliminates the need for cutting.
Features and Benefits:
•
Accessibility to cables/hoses
•
Offers more clearance; 7/8” instead of 5/8”
•
Electric blue color differentiation calls attention to the location of cables, hoses, wires,
etc.
Packaging Information:
Available in straight runs and corners
Straight Cable Bridge kit contains:
• (4) 18” yellow ErgoDeck® ramps
• (2) 6" wide blue tiles
Corner kit contains:
• (1) yellow inside corner
• (1) yellow outside corner
• (2) yellow side ramps
• (2) sections of blue ErgoDeck® solid
PRODUCT
DETAIL SHEET
Step 1: Create
1
”-2” channel
between
ErgoDeck
®
tiles.
Step 3: Lay the
assembled bridge
over the channel.
Step 2: Route
cables/wires.
Optional Step 4:
Anchor down bridge
with 12 -
¾” metal
screws.
Wearwell, Inc. • 199 Threet Industrial Road • Smyrna • Tennessee • 37167 • Phone: 1.800.264.3030 Fax: 615.255.4428 • www.wearwell.com
Dimensions:
Straight: 18” wide x 36” long
Corner: 15” wide x 15” long
These are consistent with similar products
currently on the market.
Sku Information:
560.78x15x15BLYL ErgoDeck Cable Bridge Kit-Corner
560.78x18x36BLYL ErgoDeck Cable Bridge Kit-Straight