Nemco Food Equipment Infrared Strip Heaters - Spec Sheet - Manual (Page 2)

A
IA
F
il
e
N
o
._
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
2/09 Printed in U.S.A.
NEMCO Food Equipment, Ltd.
301 Meuse Argonne, P.O. Box 305
Hicksville, OH 43526
Phone (419) 542-7751
FAX (419) 542-6690
www.nemcofoodequip.com
SPECIAL FEATURES
SUSPENDED MOUNT BAR HEATERS: all 6150 and 6151 models:
Each unit arrives with mounting brackets that should be attached to the bar heater’s case and then to the
supporting surface. If a chain is used, it should be attached directly to the mounting brackets. *For safety
reasons, install with the following clearances: 9
Љ minimum between end of unit and any wall, 12Љ minimum
between side of unit and any wall, 16 Љ minimum between bottom of unit and counter, and 1 7/8Љ minimum
between top of the unit and overhead surface. An accessory wire leg kit easily attaches to the warmers for a
fixed height warming unit.
* UL listed requirement
Model 6152-24:
This unit is a 24
Љ infinite control unit that is attached to an adjustable height base. The legs will allow a full
size serving pan to be placed under the warming unit. Height is adjustable from 15 1/2 Љ to 23 1/2Љ.
TYPICAL SPECIFICATIONS
NEMCO bar heaters are constructed with aluminum cases and tubular heating elements. All machines shall
be United States and Canadian Underwriter’s Laboratory certified and National Sanitation Foundation listed.
Infrared Bar Heater
Model No. 6150-24, 6150-36, 6150-48, 6150-60, 6150-72,
6151-24, 6151-36, 6151-48, 6151-60, 6151-72, 6152-24
Unit Shipping
Model No. Width Depth Height Rated Nominal Weight Weight
Inches/(cm) Inches/(cm) Inches/(cm) Volts Wattage Amps lbs./ (Kg) lbs./ (Kg)
6150-24 24 1/4 (61.6) 6 3/4 (17.4) 2 3/4 (7.0) 500 4.2 5.5 (2.5) 8 (3.6)
6150-36 36 1/4 (92.1) 6 3/4 (17.4) 2 3/4 (7.0) 850 7.1 8 (3.6) 11 (5.0)
6150-48 48 1/4 (122.6) 6 3/4 (17.4) 2 3/4 (7.0) 120 1100 9.2 11 (5.0) 14 (6.4)
6150-60 60 1/4 (153.1) 6 3/4 (17.4) 2 3/4 (7.0) 1400 11.7 12 1/2 (5.7) 17 (7.8)
6150-72 72 1/4 (183.6) 6 3/4 (17.4) 2 3/4 (7.0) 1725 14.4 16 (7.3) 20 (9.1)
6151-24 24 1/4 (61.6) 6 3/4 (17.4) 2 3/4 (7.0) 500 4.2 5.5 (2.5) 8 (3.6)
6151-36 36 1/4 (92.1) 6 3/4 (17.4) 2 3/4 (7.0) 850 7.1 8 (3.6) 11 (5.0)
6151-48 48 1/4 (122.6) 6 3/4 (17.4) 2 3/4 (7.0) 120 1100 9.2 11 (5.0) 14 (6.4)
6151-60 60 1/4 (153.1) 6 3/4 (17.4) 2 3/4 (7.0) 1400 11.7 12 1/2 (5.7) 17 (7.8)
6151-72 72 1/4 (183.6) 6 3/4 (17.4) 2 3/4 (7.0) 1725 14.4 16 (7.3) 20 (9.1)
15 1/2 to 23 1/2
6152-24 25 1/4 (64.2) 14 (35.6) (39.4 to 59.7) 120 500 4.2 20 (9.1) 25 (11.4)
Specifications
Made in U.S.A.
A U T O Q U O T E S A U T O Q U O T E S