Dynatek Labs SVP-24 User Manual
Page 4
To receive a customized proposal,
contact us today at:
Dynatek Labs
105 East 4th Street
Galena, MO 65656
800.325.8252
1.417.357.6155
www.dynateklabs.com
How do I choose the right tester for my device testing needs?
If you’re testing coronary, renal, SFA or carotid stents, and you are looking for maximum sample throughput, you may choose the SVP-24,
which would cover samples with IDs up to 10mm. For iliac stents, you may choose the SVP-24 or UST-M or -L, depending on the ID of
your stent. For AAA or TAA stent grafts, you may choose UST-VL for devices up to 50mm ID. Note that depending on the choice of UST
manifold, you will be able to test smaller or larger numbers of samples.
For greater versatility, you may choose the UST-XL. The UST-XL can test up to eight TAAs and AAAs with IDs up to 50mm. With the use
of optional sample adapters, you can test from 8 to 16 smaller stents from 2-24mm ID on UST-XL. For the best ROI, choose more than
one manifold when you invest in the UST.
Description
Specification
Tube configuration
straight, curved, bifurcated
Tube length (straight)
up to 300mm,
1
adjustable
Manifold sample sizes
ID
# of straight samples
2
SVP-24
2-10mm
up
to
24
UST-M
11-16mm
up to 16
UST-L
17-24mm
up to 12
UST-VL
25-50mm
up to 8
UST-XL
2-50mm
from 8 to 16 (with adapters)
Field swappable UST manifolds
yes
Accelerated
closed-loop
control
of pulsatile tube distention
yes
Testing at physiological speed
yes
Testing at accelerated speed
yes
Testing
fluid
PBS,
D/W
Fluid temperature range
≤ 45ºC
Test monitoring
tube distension, pressure, temperature, frequency
Automatic test control method
tube distension
Fluid flow through tubes
optional
Drive
Hyperdrive
linear
motor
Controller included
Laser tube distention measurement
yes; laser micrometer included
1
Depending on sample compliance
2
Number of bifurcated samples that can be mounted is approximately half the number of straight samples. Specifications are subject to change without notice.
Maximum throughput or greatest versatility?
Dynatek’s SVP and UST Stent Tester Specifications