Grain Systems Bin Flooring PNEG-221 - Manual (Page 11)

2. Recommended Method for Full Floor Installation
PNEG-221 42' Cor-Lok and Cut-Lok Flooring 11
Installation Instructions
1. When a splice is needed, plank length A as described in the floor manual should be installed
alongside plank length B.
2. The undersplice should then be installed under the split of plank A and B. The splice should extend
3" under each plank. The splice should be screwed in place as shown in Figure 2D on Page 10 .
3. This process will be repeated for all plank locations requiring a splice.
Figure 2E