beautypg.com

Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1922 User Manual

Installation instructions, Instructions

background image

Date: 03-18-13

PNEG-1922

Instructions

1004 East Illinois Street • Assumption, IL 62510 • 1-217-226-4421

PNEG-1922

Printed in the U.S.A.
Copyright © 2013 by GSI Group
www.gsiag.com

Page 1 of 5

CN-304156

Reverse Head/Take-Up Bridge

Belt Conveyor Installation

Installation Instructions

1. Place template on bottom of head section on the take-up end. Align edges of template with the

bottom housing and fasten with vise-grips or clamps.

2. Using the template as a guide, drill six (6) 9/32" holes into the bottom of the housing.

(See Figure 1.)

Figure 1

Table of contents