Grain Systems Unload Augers PNEG-1039 - Manual

Date: 08-23-07 PNEG-1039
Instructions
1004 East Illinois Street • Assumption, IL 62510 • 217-226-4421
PNEG-1039
Printed in the U.S.A.
Copyright © 2007 by GSI Group
www.grainsystems.com Page 1 of 1
Bin Safety Instruction Sheet
A. DANGER Sign No. DC-1395 is supplied with the bin unloading equipment. This safety sign should
be applied to the side of the bin near the bin opening, so that it will be viewed by people entering into
the bin storage building. Do not cover any safety signs or any other signs that are already present.
B. If the safety sign location suggested is not in full view because of equipment modifications, other
equipment in the area or any other reason, then locate the safety sign in a more suitable location.
C. Be certain that the surface is clean, dry and free of dirt and oil. Peel paper backing from decals and
stick into place. The adhesive backing will bond on contact.
NOTE: Please remember, safety signs provide important safety information for people working near bin
unloading equipment that is in operation.
NOTE: If the safety sign cannot be easily read for any reason or has been painted over, replace it
immediately. Additional safety signs may be obtained free of charge from the dealer, distributor or
ordered from the factory.
Order SAFETY SIGN NO. DC-1395