Grain Systems Bin Accessories PNEG-1885 - Manual (Page 17)

4. Installation Instructions
PNEG-1885 Special 105' 2 Ring Door for Use with Enhanced Stiffeners in 3
rd
and 4
th
Ring 17
Inner Door Assembly (Continued)
Figure 4D shows the hinge and handle assembly onto the upper and lower inner doors. Note the hinge
orientation in detail C of Figure 4D . 5/16" x 3/4" Bolts (S-275) and nuts (S-396) are used at most
attachment points. See Figure 4D for 5/16" x 1-1/4" bolt (S-277) and 5/16" x 3/4" truss head bolt
(S-4303) usage. Note usage of latch bushing (WD-6040) where the right hand and left hand latches
(WD-6037 and WD-6038) connect to the reinforcement angle (NCWT0158). The right and left hand
latches should be placed inside the reinforcement angles and attached using 5/16" lock nuts (S-5220).
Figure 4D