Guidelines for installing a sidedraw system, Chapter 8: accessories – Grain Systems Tanks PNEG-4072 User Manual
Page 141
Figure 8-18 Bottom ladder bracket
A
Ladder assembly
E
5/16 x 3/4 in. flange bolt (S-7482)
B
Ladder bottom bracket (LDR5133)
F
3/8 in. field drilled hole location
C
5/16 in. flange nut (S-396)
G
5/16 x 3/4 in. flange bolt (S-7482)
D
3/8 in. field drilled hole location
H
5/16 in. flange nut (S-396)
Guidelines for Installing a Sidedraw System
A sidedraw system will allow content unloading using gravity, and is done from the side of the bin.
General Guidelines to Follow Before Installing A Sidedraw System:
NOTE: If a sidedraw system is installed, the standard 3/4 in. anchor bolts must be replaced with 1 in.
anchor bolts.
• Side discharge is only permitted in GSI commercial bins when a GSI manufactured sidedraw flume
system has been installed. No corrugated steel bin must be unloaded through the side wall without
installation of such a system and permission of the manufacturer.
• A sidedraw should not be the only discharge system available. A standard center discharge and con-
veyor must be installed.
Pneg-4072 72 Ft Diameter 40-Series Bin
141