Grain Systems Bin Accessories PNEG-510 User Manual
Boot and transfer plate installation, Instructions, Hr unloader restrictor adjustment
Date: 04-28-11
PNEG-510
Instructions
1004 East Illinois Street • Assumption, IL 62510 • 1-217-226-4421
PNEG-510
Page 1 of 5
Printed in the U.S.A.
Copyright © 2011 by Group
www.gsiag.com
HR Unloader Restrictor Adjustment
Boot and Transfer Plate Installation
NOTE: Installation of the boot is the same whether the tank has the standard collar or the Sure-Flo
Feed Flow Control.
Slide the boot as far as possible into the tank collar or the Sure-Flo Feed Flow Control opening.
Align the boot with the Flex-Flo System that will be installed. Using the holes in the
collars for guides, drill eight (8) 11/32" holes into the boot rim.
Mount the boot to the collar with the hardware provided. Bolt the Transfer Plate and Unloader Braces to
the boot as shown.
for proper usage and assembly direction of hardware for mounting the
boot and the transfer plate. All connections should be tightened until they are “snug”.
Figure 1
Figure 2
Figure 3
Improper installation methods of the hardware may cause permanent damage and
possible breakage of the boot.
CAUTION