Danze DF022130 - Installation Manual - Manual (Page 5)

7 8
8. Press plastic anchors (C) into the holes until
they are flush against the surface. Use a hammer
if necessary.
9. Set the vanity (A) back to the intended posi-
tion, aligning holes with anchor positions.
10. Install the wall anchor hardware with a Phillips
screwdriver in the following order: flat washer
(S), plastic washer (D), spring washer (E), wood
screw (F), and metal cap (G).
11. Install the Cirtangular™ lavatory according
to the installation instructions provided with the
lavatory. The top of your Cirtangular-Brulée™
vanity (A) features a channel custom fit for
your lavatory to provide a solid seal and clean,
straight lines.
12. If needed, door hinges can be adjusted for
height and depth by loosening the hinge screws
on the inside and positioning them to the ap-
propriate location.
13. If needed, drawer glides can be adjusted for
height.
Please refer to Homeowner Care Manual for troubleshooting, care and mainte-
nance information.