Danze DF012124 - Homeowner Manual - Manual (Page 4)

5 6
HEIGHT: To adjust height of door turn adjust-
ing screws on top and bottom of interior hinge
bracket (circled on the diagram).
SIDE-TO-SIDE: To adjust the door side-to-side,
turn adjusting screw on front of hinge.
DEPTH: To adjust depth of door, turn adjusting
screw on back of hinge to desired depth.
CARE & MAINTENANCE
Bathroom Furniture
Use a clean, soft, lint-free cloth to remove dust or other residue. Do not use
corrosive or alcohol-containing liquids.
Do not expose to continuous direct sunlight.
Avoid extremes in room humidity. Too high or too low humidity can cause
the wood to warp or the glue lines to fail.
Avoid extreme changes in temperature.
Arrange furniture away from heating & cooling vents.
DANZE BATHROOM FURNITURE WARRANTY
One (1) Year Limited Warranty – Bathroom Furniture
Danze, Inc. (Danze) warrants to the original purchaser of this product that the
bathroom furniture wood portion will be free from defects in material and work-
•
•
•
•
•
3. Unscrew the Phillips head screws from the in-
terior hinge bracket and remove.
4. Insert the new hinge into indentation on van-
ity door and fasten hinge with screws.
5. Align hinge bracket with pilot holes on inside
of vanity and fasten with screws.
6. Slide the hinge onto the hinge bracket and
press down on back of hinge to lock in place.
Adjusting the vanity hinge
If necessary, use the following steps to adjust your door alignment.
Some models include a cover plate on the front
of the hinge bracket. Remove cover plate before
adjusting; put plate back in place when done.
•