Installation instructions, Product dimensions, Tools required – Danze DF012124 - Installation Manual User Manual
Page 3

3
4
InStaLLatIon InStructIonS
1. Carefully position the vanity (A) in front of the
intended installation location.
Product dIMenSIonS
Level
Pencil
Hammer
Drill
Hole Saw
Phillips Screwdriver
tooLS reQuIred
(S) Flat Washers (2 each)
(J) Knob Assembly
(H) Brushed Nickel Knobs (2 each)
( I ) 1” Bolts (2 each)
(U) Touch Up Paint
(V) Welcome to Danze Kit
(
W
) Installation Instructions
(X) Homeowner Care Manual
(Y) Warranty Parts Guide
Safety Glasses
33
1/4
5/16” Drill Bit