Banks Power Chevy_GMC Trucks: Duramax LLY-LBZ (Diesel ’06 - 07 6.6L) Speed Control- SpeedBrake, Advance User Manual '06-08 (PDA) For use with PowerPDA - Manual (Page 9)

97233 v.3.0
9
Section 2
SeLF DiaGNoSTiCS
The SpeedBrake stores a running log of
all events that affect its performance.
This log may be used to identify
any diagnostic concerns with the
SpeedBrake.
1.
Press the center button on the
5-way navigator to take you to the
System Menu screen.
2.
Touch the button labeled ‘Next>’
to move to the second screen of the
System Menu.
3.
Next, touch the ‘Self Diagnostics’
button. See Figure 7.
4.
The ‘Self Diagnostics’ screen
displays a log of diagnostic events
related to the Banks SpeedBrake. See
Figure 8. The ‘Logged Events’ list
takes a moment to update each time
this screen is opened (as indicated
by a slight flickering of the list). Once
the list is updated, the most current
event will appear at the top of the
list. Each event has an associated
timestamp and description, which will
be displayed below the list when that
event is highlighted. Each key cycle
of the vehicle produces a minimum
of two logged events. Table 1 lists
the possible diagnostic codes and
corrective action.
5.
Touch the button labeled ‘Down’
to scroll down through the recorded
events.
6.
Touch the button labeled ‘Up’ to
scroll up through the recorded events.
To view a recorded event touch the
event item and it will display right
below the log window. See Figure 8.
7.
Touch the ‘
to the System Monitor screen.
8.
A pop-up “Log-file” screen, will
appear asking you if you want to erase
the contents of the log. Press ‘No’ to
keep contents on Log-file or ‘Yes’, to
erase Log-file.
-END, SEcTION 2-
Figure 7 Figure 8