Banks Power Interface- Banks iQ 1996 & Later Vehicles with OBDII Diagnostics - Manual (Page 11)

97272 v.1.0
11
Banks iQ comes with a fully rechargeable
battery. After Mounting and Connecting,
see
Section 3 , simply plug the supplied
Banks iQ USB interface cable into the
device’s power connection. See Figure
2. When used in your vehicle, Banks iQ
will display an orange light and operate
on the vehicle’s power source. When
out of the vehicle, Banks iQ can be
charged with the supplied AC-outlet wall
charger. Banks iQ can also be charged
by plugging the supplied USB cable into
a compatible computer connector. Upon
being fully charged, Banks iQ will display
a green light.
Press and hold the Power button to
turn Banks iQ on. Within a few minutes,
the Banks iQ will adjust for time, date
and time zone using GPS information. It
even adjusts automatically for daylight
savings time.
NOTE: When Banks iQ is powered off,
date and time information is lost until
the device has been restarted and
locates a GPS signal.
Use the on-screen buttons to access
and use all enabled Banks iQ’s
functions.
Receive Update notices
Banks iQ is constantly evolving.
We invite you to register at www.
bankspower.com/banksiq to receive
important emails regarding updates
and upgrades for your Banks iQ device.
For more detail instruction to update
your Banks iQ please go to banks
website at www.bankspower.com/
iqupdate
-END, SECTION 2-
Section 2
BAnkS IQ START UP
Figure 2 Left Side Edge
Figure 1 Banks iQ