VANCO 280516 - Manual

TECHNICAL SUPPORT
www.vanco1.com 800.626.6445
PRODUCT MANUAL
Part Number: 280516
DEAR CUSTOMER
Thank you for purchasing this product.
For optimum performance and safety, please
read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
S-VGA over Category 5e Cable with Audio Extender
FEATURES:
• Extends VGA and Audio signals to be transmitted up to 300 meters
(984 ft) over a Single Category 5e cable
• Ideal for classroom video distribution, lecture halls, overhead projector
systems, tradeshows, etc.
• Dual Output allows for one display with audio at origin location and an
additional display device with audio in a remote location
• Adjustable Gain and Peak
• 3.5 mm stereo audio jack
• Supports computer resolutions up to 1920x1200 (WUXGA)
• Transmission Range: 300 meters (984 ft)
• Two 5V DC, UL listed power supplies
• Dimensions: Sender: 2.56” W x 1” H x 4” D, Receiver: 1.69” W x .88”
H x 3.38” D
SPECIFICATIONS:
Input connector ................................... VGA(Female 15pin), Stereo Audio
Output connector ................................. VGA(Female 15pin), Stereo Audio,1xRJ45
Vertical Frequency Range...................... 60/75/85Hz
Resolutions(PC) ................................... 640X480, 800X600, 1024X768,
1280X720, 1280X768, 1280X960, 1280X1024, 1600X900, 1600X1200,
1920X1080, 1920X1200
Limited Warranty ................................. 1 Year Parts and Labor
Operating Temperature ......................... 0 to +70 Degrees C
Operating Humidity .............................. 10% to 85 % RH (no condensation)
Storage Temperature ........................... -10to +80 Degrees C
Storage Humidity ................................. 5% to 90 % RH (no condensation)
Power Supply ..................................... 5V@2A, max 5W
Converter Unit ..................................... FCC,CE,UL
Power Supply ...................................... UL,CE,FCC
Note: Specifications are subject to change without notice.
CONNECT AND OPERATE
1. Connect the single VGA source to the main VGA input using a piece of
VGA cable.
2. Connect VGA output of the Sender to a local display and Audio output of
the Sender to a local Sounder
3. Connect Sender and each Receiver using a piece of each pieces of CAT-
5e/6
4. Connect VGA outputs of Receivers to remote displays and Audio output of
Receivers to remote sounders.
5. Plug one 5V@ 2A power supply into the VGA UTP 1X1Splitter and the
others 5V@2A power suppliers to Receiver
**Attention: Insert / Extract cable gently.
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure
the following items are contained in the shipping carton:
1. VGA UTP Extender 1X1 Splitter
2. User’s Manual.
3. One Receiver
4. Two pieces of 5V@2A DC Power Supply