VANCO VPW-280789 (4X4) - Manual (Page 3)

www.vanco1.com
888.769.4156 3
FEATURES
Vanco Powered by Wyrestorm HDMI Matrix Selector Switch allows 4 HDMI sources to be distributed to up
to 4 displays simultaneously. VPW-280789 allows 4 sources to be displayed simultaneously on any display
or a single source duplicated on multiple displays providing flexibility for the perfect solution. With an output
bandwidth of 6.75 Gbps over HDMI, Vanco Powered by Wyrestorm Matrix Selector Switchers are capable
of full 1080p HD video and HD multi-channel audio distribution with simple control using the front panel or
remotely via IR Receivers at display locations. Also features EDID management system, which allows and
encourages device communication compatibility for seamless integration. The VPW-280789 builds on the
simple and effective HDMI-only distribution of its two smaller siblings by adding greater control in the form
of RS232 connectivity for firmware updates or third party integration. For reliable, no-nonsense HDMI
distribution and control on a budget, over short distances, the Vanco Powered by Wyrestorm Matrix Selector
Switch is a solid choice for any application.
Vanco Powered by WyreStorm HDMI® 4x4 Matrix
Selector Switch with RS232
Part # VPW-280789
• Allows up to 4 HDMI sources to be distributed
simultaneously to up to 4 displays
• Low cost, full HD Matrix Switcher providing a
perfect solution for Home or Retail AV as well
as Commercial and Hospitality installations on
a budget
• Each output is able to show any connected
source simultaneously regardless of whether
the input carries HDCP encryption
• HDMI ports also support DVI signals
• Each Output port can be fed to multiple displays
(cascaded)
• HDCP Compliant
• Automatically amplifies and equalizes the HD
signal for optimum performance with no loss
of quality
• Reads and copies EDID from connected devices
with additional EDID configuration through
customizable DIP switch settings for fast,
successful installations
• 2k resolution supported
• RS232 port for firmware updates or third party
control - open source integration protocols
available for market leading control systems
• Simple switching remote control included, which
can also be learned into a universal remote
handset to allow the control of multiple devices
from one handset.
• R 3.5mm mini-jack extension port at rear for
local IR control even if unit is housed in an
enclosed space or for longer IR connections
• HDMI v1.2, v1.3 supported
• Supports 24Bit Color depth
• Signaling rate/output bandwidth of 6.75Gbps
• Fully compatible with 1080p HD video and HD
multichannel Audio
• Choose from 5 switching modes – front panel
buttons, Local remote control, RS232 control
(when paired with a extender set), IR call-back
(dedicated IR extension cable connected to IR
extension port, and IR emitters on sources
required)
• Key locking to avoid accidental operation
• Mounting brackets included
• 19” standard, 1U size for rack installation
• 12V DC, UL Listed Power Supply
• Dimensions: 17.3” W x 1.7” H x 7.9” W
NOTE: If using IR Source control feature, we recommend no duplication of source type due to the global IR
feature. If duplicate sources are being used, please consider the HDBT or HDBT Lite models as these units
offer discrete IR routing