VANCO WM3665F - Manual (Page 3)

-6-
Part 2b-Attaching brackets to screen with recessed back
Center brackets vertically on back of screen. Select the medium(F or G) or
large(H) screws. Attach brackets to screen using four selected screws,four
square washers(I) and four spacers(M) at the top and bottom of each bracket.
Tighten screws firmly. Do not overtighten
.
Part 2b-Attaching brackets to screen with recessed back
Square washer(I)
Medium hole for
M5 and M6 screws
Large hole for
M8 screws
I
F-H
M
UP
UP
-3-
Part 1a-Wood Stud Mounting
.
Use wall plate(1) as a template, make sure it is level, and mark mounting
holes along the center lines of the wood studs. Drill four 3/16
) ) . .
four
(5mm)dia
holes 2 (50mm) deep. Level wall plate(1) and attach to wall with four long
bolts(J and four washers(L . Tighten screws firmly Do not overtighten
”
”
Part 1a-Wood Stud Mounting
2 50mm) ” (
Φ3/16 (5mm) ”
Wood stud
J
L
Bubble level